Highlight:
802.3bt Industrial PoE Switch
, 1000T Industrial PoE Switch
, 10/100/1000T Industrial PoE Switch
Industrial 4-Port 10/100/1000T 802.3bt 90W PoE + 1-Port 10/100/1000T + 2-Port 100/1000X SFP Gigabit Ethernet Switch
Industrial 4-Port 10/100/1000T 802.3bt 90W PoE + 1-Port 10/100/1000T +
2-Port 100/1000X SFP Gigabit Ethernet Switch
Industrial PoE Switch Advantage
► 5 10/100/1000BASE-T Gigabit Ethernet RJ45 copper ports
► 2 SFP slots, supporting 1000BASE-X and 100BASE-FX transceiver in dual modes
► Complies with IEEE 802.3bt PoE Standard
► Up to 4 ports of IEEE 802.3bt/at/af devices powered
► Up to 360-watt PoE budget
► Supports PoE power up to 95 watts for each PoE port
► Supports DIN-Rail installation
► Compact fanless design avoids overheating
► IP40 rugged high-strength metal case
► 48~57V DC redundant power with reverse polarity protection
► -40°C to 80°C (-40°F to 176°F) operating temperature
Overview
E-link LNK-IMC205GHP-SFP Series is a Mini Industrial High Power 90W 802.3bt PoE Switch with
4*10/100/1000T Ethernet ports that support IEEE802.3at/af/bt for a maximum of 90W/port,
1*10/100/1000T Gigabit Ethernet port, and 2*100/1000 dual rate SFP slots for fiber connection.
LNK-IMC205GHP-SFP adopts the IEEE 802.bt PoE++ standard and PoH technology, it is capable
of sourcing up to 95 watts of power by using all the four pairs of standard Cat5e/6 Ethernet cabling to
deliver power and full-speed data to each remote PoE compliant powered device (PD). It possesses
triple amount of power capability than the conventional 802.3at PoE+ and is an ideal solution to
satisfy the growing demand for higher power consuming network PDs, such as: PoE PTZ speed dome
cameras, Thin clients, AIO (all-in-one) touch PCs, point of sale (POS) and information kiosks, Remote
digital signage displays and PoE lightings.The LNK-IMC205GHP-SFP is IP40 rated and DIN-rail
mountable. It also provides high EFT and ESD protection for industrial networking applications, such
as power/utility, water wastewater,oil/gas/mining, factory automation, security surveillance, ITS and
any other outdoor or harsh environment.
Application
Technical Indexs
| Ethernet |
| Standards: |
IEEE 802.3 Ethernet |
| IEEE 802.3u Fast Ethernet |
| IEEE 802.3ab Gigabit Ethernet |
| IEEE 802.3x Full-Duplex Flow Control |
| IEEE 802.3az Energy Efficient Ethernet (EEE) |
| IEEE 802.3bt 4-pair Power over Ethernet |
| IEEE 802.3at Power over Ethernet Plus PSE |
| IEEE 802.3af Power over Ethernet Plus |
| Forward & Filtering Rate: |
14,880pps (10Mbps) |
| 148,800pps (100Mbps) |
| 1,488,000pps (1000Mbps) |
| Packet Buffer: |
2Mbits |
| Packet Length: |
10Kbytes |
| MAC Address Table: |
4K |
| Switch Fabric: |
14Gbps/non-blocking |
| Exchange Property |
Backplane bandwidth: 14Gbps;
Packet forwarding rate: 14.88Mpps
|
| Connector: |
4 ports with 802.3at PoE+ injector function (Ports 1 to 4) |
| Network Cables |
Twisted-pair:
10BASE-T: 2-pair UTP Cat. 3,4,5, up to 100m
100BASE-TX: 2-pair UTP Cat. 5, up to 100m
1000BASE-T: 4-pair STP Cat 5 up to 100m
Fiber-optic Cable
1000BASE-SX:
50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m/2km.
1000BASE-LX:
9/125μm single-mode cable, providing long distance of 2/10/20/40/80/120km (depending on SFP module)
100BASE-FX:
50/125μm or 62.5/125μm multi-mode fiber cable for up to 2km (depending on SFP module)
9/125μm single-mode cable for 20/40/60/120km (vary on SFP module)
|
| Interface |
| Connector: |
5 x RJ45 (4-Port 802.3at PoE Out) |
| Optical Port: |
2 x SFP 1000Base-X or 100Base-FX (auto detection) |
| PoE (Power over Ethernet) |
| Standard: |
IEEE802.3af/at/bt |
| Port: |
RJ45 |
| Power Pin Assignment: |
Pair 1 End-span: 1/2(-), 3/6(+)
Pair 2 Mid-span: 4/5(+), 7/8(-)
802.3bt/PoH: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
|
| PoE Budget: |
Up to 360-watt PoE budget |
| Environmental |
| Operating Temperature: |
-40°C to 80°C (-40°F to 176°F) |
| Storage Temperature: |
-40°C to 85°C (-40°F to 185°F) |
| Relative Humidity: |
5% to 95% non-condensing |
| MTBF |
> 200,000 hrs |
| Electrical and Mechanical |
| Input Power: |
48~57VDC (Terminal Block) |
| Power Consumption: |
382W Max. (PoE in use) |
| <5W (PoE not in use) |
| Power Input Overload: |
Automatic Resettable |
| Reverse Polarity: |
Present |
| Dimensions (LxWxH): |
95 x 88 x 46mm |
| Weight: |
300g |
| Casing: |
Aluminum Case |
| Mounting Options: |
DIN-Rail |
| LED Indicators: |
| PWR: |
Power |
| L/A: |
Link/Activity |
| PoE: |
PoE Status |
| FX1/FX2: |
SFP Fiber Link Status |
| Regulatory Approvals |
| ISO9001, CE, FCC, RoHS |
| EN55022:2010+AC: 2011, Class A |
| EN 61000-3-2: 2006+A1: 2009+A2: 2009 |
| EN 61000-3-3: 2013 |
| EN55032:2017 |
| IEC 61000-4-2: 2008 (ESD) |
| IEC 61000-4-3: 2010 (RS) |
| IEC 61000-4-4: 2012 (EFT) |
| IEC 61000-4-5: 2014 (Surge) |
| IEC 61000-4-6: 2013 (CS) |
| IEC 61000-4-8: 2009 (PFMF) |
Orrdering Information
| Model |
Description |
| LNK-IMC205GHP-SFP |
Industrial 4-Port 10/100/1000T 802.3bt 90W PoE + 1-Port 10/100/1000T + 2-Port 100/1000X SFP Gigabit Ethernet Switch |
| SFP Options |
► SFP option. Please select your SFP on our SFP Options Page (Industrial SFP). |
| ► SFP module is to be purchased separately. |
| Mounting Options |
► Default DIN-Rail Bracket installed; |
| Power Options |
► 480W/10A 48VDC DIN-Rail Power Supply. Open Wire for Terminal Block. |
| ► Power Supply is to be purchased separately |
Your message must be between 20-3,000 characters!
