Highlight:
LPS PoE Injector Adapter
, Plastic Case PoE Injector Adapter
, 30W Gigabit PoE Injector
Gigabit PoE Injector Adapter IEEE802.3at 30W support 10/100/1000Base-T
Gigabit PoE Injector Adapter IEEE802.3at 30W support 10/100/1000Base-T
PoE Injector Advantages
► Up to 30W of PoE Power
► Compliant with IEEE802.3af/at Standard
► Support 10/100/1000Base-T
► Compliant with Limited Power Source (LPS)
► High Efficiency > 85%
► Low No Load Power Consumption < 0.5W
► Provide 2 LED indicators include Power LED(Green) and PoE LED(Orange)
► Over-Voltage/Load/Temperature & Short Circuit protections
► Plug & Play, no configuration required
► Safe and Reliable Power to WLAN Access Points
► Automatic Detection and Protection of Non-standard Ethernet Terminals
► Injects 48V DC through a CAT 5 cable, use all 2 pairs into remote devices
Overview
LNK-POE300AT 30W – 48V Gigabit PoE Injector is a long-distance driving, fast network performing,
strong PoE Output IEEE802.3af/at certified midspan. It is a single port indoor PoE injector that can
provide up to 30W based on the IEEE 802.3af/at standard. The midspans are ideal to power 802.11
access points, pan-tilt-zoom (PTZ) and dome cameras, IP videophones, thin clients and other power
Ethernet end terminals with 30W of power. The solutions support IEEE 802.3af/at powered devices and
are also backward compatible and safe to use with any IEEE 802.3af/at terminal. With plug and-play
installation, they are easy and cost effective to implement leveraging existing Ethernet infrastructure
while at the same time providing the assurance of a future proof network.
Technical Indexes
|
Ethernet
|
|
Standards:
|
IEEE 802.3 10Base-T Ethernet
|
|
|
IEEE 802.3u 100Base-TX Fast Ethernet
|
|
|
IEEE 802.3ab 1000Base-T Gigabit Ethernet
|
|
Processing Type:
|
Forward
|
|
|
Half-duplex, Full-duplex
|
|
Forward Filter Rate:
|
1,488,000pps (1000Mbps)
|
|
Cabling:
|
10/100/1000Base-T: Cat5 or above
|
|
Maximum Distance:
|
IEEE802.3af/at PoE (30W): 2-pair UTP Cat. 3, 4, 5, up to 100m (328ft)
|
|
Connector:
|
LAN: 1 x RJ-45 STP, “Data” Input Port
POE: 1 x RJ-45 STP, “Data + Power” Output Port
AC Connector: 1 x AC Input power socket, IEC-60320 C13
|
|
Environmental
|
|
Operating Temperature:
|
-10°C to 50°C (14°F to 122°F)
|
|
Storage Temperature:
|
-20°C to 70°C (-4°F to 158°F)
|
|
Relative Humidity:
|
5% to 95% non-condensing
|
|
MTBF:
|
>200,000hrs
|
|
Electrical and Mechanical
|
|
Input Voltage Range:
|
100-240V AC @50/60Hz.
|
|
Output Voltage:
|
DC 48V
|
|
Power Consumption:
|
30 watts max.
|
Application
Ordering Information
| Model |
Description |
| LNK-POE300AT |
PoE Injector with Power Cord: 10/100/1000Mbps, IEEE 802.3at 30W |
Your message must be between 20-3,000 characters!
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews