| Ethernet & Fiber |
|
| Standards |
IEEE802.3 10Base-T |
|
| IEEE802.3u 100Base-TX |
|
| IEEE802.3ab 1000Base-T |
|
| IEEE802.3z 1000Base-X (Fiber) |
|
| IEEE802.3x Flow Control |
|
| IEEE802.1q VLAN Bridge Operation |
|
| IEEE802.3af Power over Ethernet |
|
| IEEE802.3at Power over Ethernet |
|
| Processing Type |
Store-and-Forward (2.5M cache) |
|
| System Mode |
Standard/VLAN Isolation |
|
| Switch Fabric |
20 Gbps |
|
| MAC address |
8K |
|
| Forward Filter Rate |
14,880pps (10Mbps) |
|
| 148,800pps (100Mbps) |
|
| 1,488,000pps (1000Mbps) |
|
| Ethernet Port |
8 x 10/100/1000Mbps RJ45 Ethernet Ports |
|
| Optical Port |
2 x SFP 1000Base-FX |
|
| Electrical and Mechanical |
|
| Input Power (AC/DC 2 power) |
48~57VDC or 100~265VAC 50/60Hz |
|
| Power Consumption |
20W Max. (PoE not in use) |
|
| 150W Max. (PoE in use) |
|
| LED Indicators |
|
| Power |
Power Status |
|
| 9-10 |
Port Fiber |
|
| PoE Green |
48V PoE |
|
| PoE Orange |
24V PoE |
|
| Link Orange |
1000M Speed |
|
| Link Green |
10/100M Speed |
|
| PoE |
|
| Standard |
IEEE802.3af/at |
|
| Port |
RJ45 Port1~Port4 |
|
| Max. Power per port |
30W Max per port (Alternative B mode) |
|
| PoE Output Auto-sensing |
Support both Active and Passive PD without setting |
|
| PoE Interfaces |
PoE+ IEEE 802.3af/at (Pins 1, 2+; 3, 6-)
24VDC Passive PoE (Pins 4, 5+; 7, 8-)
|
|
| Function |
Support Overcurrent, Shortcurrent, OverVOL, UnderVOL, Power Limitation, Safe Function HiPower PD star BOOT, After Boot |
|
| Mechanical |
|
| Dimensions (L x W x H) |
210 x 140 x 45 mm |
|
| Weight |
1.5Kg |
|
| Casing |
Metal Case |
|
| Mounting options |
Wall-mount and desk/shelf mounting |
|
| Environmental |
|
| Operation Temperature |
0°C to 40°C (32°F to 104°F) |
|
| Storage Temperature |
-40°C to 70°C (-40°F to 158°F) |
|
| Relative Humidity |
5% to 90% non-condensing |
|
| MTBF |
> 200,000 hrs |
|
| Regulatory Approvals |
|
| ISO9001,CE, FCC, RoHS |
|
| WEB software function |
|
| Standards |
IEEE 802.3x
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z
IEEE 802.3ad
IEEE 802.3q, IEEE 802.3q/p
IEEE 802.1w, IEEE 802.1d, IEEE 802.1S |
| MAC Address |
8K MAC addresses; MAC address learning and aging |
| VLAN |
4k VLANS; Port-based VLANs; 802.1Q VLAN |
| Spanning Tree |
STP(Spanning Tree Protocol)
RSTP/MSTP( Rapid Spanning Tree Protocol)
PPS ring network protocol
EAPS ring network protocol
802.1x argumentation agreement |
| Link Aggregation |
Max 8 aggregation groups, each supports 8 ports
Static aggregation and dynamic aggregation |
| Port Mirror |
Many-to-one port mirroring |
| LoopGuard |
Loop protection function, real-time detection, rapid alarm, accurate positioning, intelligent blocking, automatic recovery |
| isolation |
Support downlink ports isolated from each other and communicate with upstream port |
| Port flow control |
Half duplex based back pressure control
Full duplex based on PAUSE frames |
| line rate |
Support port based input / output bandwidth management |
| IGMP Snooping |
IGMPv1/2/3 and MLDv1/2 Snooping
GMRP protocol registration
Multicast address management, multicast VLAN, multicast routing ports, static multicast addresses |
| DHCP |
DHCP Snoping |
| Storm suppression |
Unknown unicast, multicast, unknown multicast, storm suppression of broadcast type
Storm suppression based on bandwidth tuning and storm filtering |
| Security |
User port+IP address+MAC
ACL based on IP and MAC
Security properties of port based MAC address quantities |
| QOS |
802.1p port queue priority algorithm
Cos/Tos, QOS sign
WRR (Weighted Round Robin),Weighted priority rotation algorithm
WRR, SP, WFQ, 3 priority scheduling models |
| Port |
Auto-MDIX ; Auto negotiation |
| System maintenance |
Upgrade package upload; system log view
WEB restore factory configuration |
| Management and maintenance |
WEB NMS
Remote configuration and maintenance using Telnet
SNMP V1/V2/V3；SSHV1/V2
RMON |
Your message must be between 20-3,000 characters!
