Highlight:
1G/10G SFP+ OEO Converter
, Industrial 1G/10G SFP+ OEO Converter
Industrial 1G/10G SFP+ to SFP+ OEO Converter (3R Repeater) with 1G Ethernet Media Converter Function
Industrial 1G/10G SFP+ to SFP+ OEO Converter (3R Repeater) with 1G Ethernet Media Converter Function
Model:ETH-IMC2402-OEO series
Overview
ETH-IMC2402-OEO series Industrial 10G OEO Converter is a connection between fiber to fiber 10Gbps
equipment function as fiber media converter, or as fiber repeater for long distance transmission in harsh
environment at operating temperature -40~ 80℃.
It is for network backbone (SAN, LAN, MAN) application. Support SDH/SONET STM-64/OC-192, 10G fiber
channel, 10G Ethernet, which can be applied in R&D laboratory, data center, telecommunication room.
It supports optical wavelength conversion 1310nm/1550nm/CWDM/DWDM with Loop-back.
When only connecting the copper and fiber port, it can be connection between fiber to copper 1Gbps
Ethernet equipment function as fiber-to-copper media converter for long distance transmission up to 120km.
Features
► Transparent Transport and very low delay
► 3R function (Regeneration, Reshaping, Re-timing)
► Support hot plugging, full state led display, easy installation
► Support ITUT prescribed DWDM/CWDM wavelength, and can also display it’s DDM function
► Support Loop-back and Jumbo Frame
► DIP Switch supports 1.25G/10G fiber data rate switching
► Can be as 1G Ethernet Media Converter if using Ethernet
► IP40 Aluminum Case
► Supports DIN-Rail/Wall-Mount installation
► -40°C to 80°C (-40°F to 176°F) operating temperature
Technical Indexes
| Performance Data |
Technical Indexes |
| Equipment function |
3R Repeater |
| Transmission Speed |
10G: 8.5Gb/s-11.7Gb/s |
| Protocols |
8.5G Fiber Channel
SONET OC-192, SDH STM-64 (9.95Gbps)
10G WAN (10Gbps)
10G LAN (10.31Gbps)
OTN OTU-2 (G.709) (10.70Gbps)
10G LAN with 255/237 FEC coding (11.09Gbps)
10G Fiber Channel (11.32Gbps)
10G POS
|
| Interface Type |
SFP+ to SFP+ |
| Transmission Distance |
SFP+ module: up to 80km |
|
Maximum Packet
Forwarding Rate
|
14,880,950/S |
| Operating Temperature |
-40°C to 80°C (-40°F to 176°F) |
| Storage Temperature |
-40°C to 85°C (-40°F to 185°F) |
| Relative Humidity |
5% to 95% non-condensing |
| MTBF |
> 200,000 hrs |
| Ethernet Media Converter Specifications |
| Standards |
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3z, 1000BASE-SX/LX
IEEE 802.3x Full-duplex flow control
|
| Work Mode |
10/100/1000BASE-T to 1000BASE-SX/LX |
| Port Type |
SFP to RJ45 |
| Network Cables |
Twisted-pair
10BASE-T: 2-pair UTP Cat. 3,4,5, up to 100m
100BASE-TX: 2-pair UTP Cat. 5, up to 100m
1000BASE-T: 4-pair STP Cat 5 up to 100m
Fiber-optic Cable
1000BASE-SX:
50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m/2km.
1000BASE-LX:
9/125μm single-mode cable, providing long distance for 10/20/40/80/120km (vary on SFP module)
|
| Electrical and Mechanical |
| Input Power |
12~48VDC, Redundant Power (6-pin Terminal Block) |
| Power Consumption |
8W Max |
| Protection |
| Power Input Overload |
Automatic Resettable |
| Reverse Polarity |
Present |
| DIP Switch |
| 4-digit DIP switch function |
DIP |
Function |
Settings |
| SW 1 |
1.25G/10G |
ON - 1.25~8.5G |
OFF - 10.3G or 14.025G |
| SW 2 |
Reserved |
ON - Reserved |
OFF - Reserved |
| SW 3 |
Reserved |
ON - Reserved |
OFF - Reserved |
| SW 4 |
Reserved |
ON - Reserved |
OFF - Reserved |
| LED Indicators: |
| PWR |
Power Status |
| FX1 |
SFP Port-1 |
| FX2 |
SFP Port-2 |
| L/A |
TP LINK/ACT |
| Dimensions (WxDxH) |
95 x 70 x 30 mm |
| Weight |
0.25Kg |
| Casing |
Aluminum Case |
| Mounting Options: |
DIN-Rail mount |
| Regulatory Approvals |
| ISO9001, CE, RoHS, FCC |
| EN55022:2010+AC: 2011, Class A |
| EN 61000-3-2: 2006+A1: 2009+A2: 2009 |
| EN 61000-3-3: 2013 |
| EN55024:2010 |
| IEC 61000-4-2: 2008 (ESD) |
| IEC 61000-4-3: 2010 (RS) |
| IEC 61000-4-4: 2012 (EFT) |
| IEC 61000-4-5: 2014 (Surge) |
| IEC 61000-4-6: 2013 (CS) |
| IEC 61000-4-8: 2009 (PFMF) |
Application
ordering information
| Model |
Description |
| ETH-IMC2402-OEO |
Industrial 1G/10G SFP+ to SFP+ OEO Converter (3R Repeater) with 1G Ethernet Media Converter Function |
| SFP Options |
► SFP option. Please select your SFP on our SFP Options Page |
| ► SFP module is to be purchased separately. |
| Mounting Options |
► Default DIN-Rail Bracket installed |
Your message must be between 20-3,000 characters!
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews